|
|
| FH Flyer Marking Heads Only Version 5.1.1.6091 For FH Flyer running on Windows® Vista, XP, or 2000 Operating Systems Install the newest WinMark Pro® v5 laser marking software for Windows Vista, XP, or 2000 platforms. Important Note: After installing build 6091, we highly recommend that you upgrade your Flyer firmware to version 2.30. The Flyer firmware update file, Update_2.30.fhz, is available for download from the FH Series Resources page. See the FH Flyer or Fenix Flyer Operator’s Manual for upgrade instructions. |
|
|
• Download single file installer of 5.1.1.6091. Released 11/04/2008.
|
|
|
|
|
| FH Index, Tracker, and Smart Marking Heads Version 4.6.2.5245 For Windows® XP, 2000 or NT4 Operating Systems Install the newest WinMark Pro® laser marking software for Windows XP, 2000, or NT4 platforms. Please note that you must use a PCI-bus Fiber Link Controller Card (FLCC) when running version 4 software. [Release Notes] [Change History] [Version 4 PCI Installation PDF] [Product Manual (PDF)] |
|
• Download single file installer of 4.6.2.5245. Released 8/15/05.
|
|
|
|
| FH Index, Tracker, and Smart Marking Heads Version 2.1.0 (Build 4056) For Windows® 95/98 Operating Systems Install the latest version 2 release of WinMark Pro for Windows 95/98 systems using ISA- or PCI-bus Fiber link Cards. [Release Notes] [Change History] [Version 2.1 PCI Installation PDF] [Product Manual (PDF)] |
|
• Download single file installer of 2.1.0 Build 4056. Released 2/10/03.
• Download two disk installation of 2.1.0 Build 4056. Released 2/10/03.
Important Note: If you are installing WinMark Pro version 2 and you are using a PCI-bus Fiber Link Card, you must install the PCI Device Drivers listed below. |
|
| For Windows®
95/98 PCI Card Users (WinMark Pro Version 2.1 only) You will need to download the following Device Driver files to your hard disk or to Disk 2 of 2 of your WinMark Pro installation disk. (The .vxd file is a system file and may not be visible when you copy it to your computer). Driver installation is described in the Version 2.1 PCI Installation document.
|
|
| WinMark Pro File Import
Filters (v2.X only) After installation of WinMark Pro version 2.X, you will need to download and install the File Import Filters below in order to import vector files. Supported File formats
|
|
| Download self-extracting Zip file containing individual diskette files: • Download WMFILTER.EXE 5.1 MB |
|
| .MKH Demonstration Files These demo mark files illustrate how to optimize marking parameters, communicate with parts handling equipment, and much more. |
|
| ActiveX Sample Files ActiveX control of laser marking is possible through Microsoft® Visual Basic® or Microsoft Visual C++® programming using WinMark Pro's ActiveMark™ technology. These files contain sample VB and C++ code illustrating how WinMark Pro's ActiveX control methods are used.
|
|
| (Back to top) |