Download WinMark Pro Laser Marking Software
FH Flyer Marking Heads/Fenix Flyer Laser Markers
Version 6.3.0.7328 For FH Flyer running on Windows® 7, Vista, or XP, with 64-bit/32-bit
Operating Systems.
Install the newest WinMark Pro® v6 laser marking software for Windows 7, Vista, or XP platforms.
Important Note: For best performance, upgrade your Flyer/Fenix Flyer firmware after installing WinMark Pro build 7328. The firmware update file, update_3.24.exe, is available for download from the WinMark Pro firmware page.
Download single file installer of 6.3.0.7328. Released 1/31/2012.
WinMark_Setup 7328_ECO.exe 72 MB
FH Index, Tracker, and Smart Marking Heads
Version 4.6.5245 For Windows®XP, 2000, or NT4 Operating Systems
Install WinMark Pro® laser marking software for Windows XP, 2000, or NT4 platforms. Please note that you must use a PCI-bus Fiber Link Controller Card (FLCC) when running version 4 software.
[Release Notes] [Change History] [Version 4 PCI Installation PDF]
Download single file installer of 4.6.5245. Released 8/15/05.
WinMark_Setup.exe 10.3 MB
FH Index, Tracker, and Smart Marking Heads
Version 2.1.0 (Build 4056) For Windows® 95/98 Operating Systems
Install the latest version 2 release of WinMark Pro for Windows 95/98 systems using ISA- or PCI-bus Fiber Link Cards.
[Release Notes] [Change History] [Version 2.1 PCI Installation PDF]
Download single file installer of 2.1.0 Build 4056. Released 2/10/03.
Setup.exe 2.4 MB
Download two disk installation of 2.1.0 Build 4056. Released 2/10/03.
Two disk installation files 2.4 MB
(Self-extracting ZIP file contains: Setup.exe, Setup.w02)
Important Note: If you are installing WinMark Pro version 2 and you are using a PCI-bus Fiber Link Card, you must install the PCI Device Drivers listed below.
For Windows® 95/98 PCI Card Users (WinMark Pro Version 2.1 only)
You will need to download the following Device Driver files to your hard disk or to Disk 2 of 2 of your WinMark Pro installation disk. (The .vxd file is a system file and may not be visible when you copy it to your computer). Driver installation is described in the Version 2.1 PCI Installation document.
[Version 2.1 PCI Installation (PDF)]
Download Device Driver files 84KB
(Self-extracting ZIP file contains: Synmarkh.inf, Synmarkh.vxd)
WinMark Pro File Import Filters (v2.X only)
After installation of WinMark Pro version 2.X, you will need to download and install the File Import Filters below in order to import vector files.
Download self-extracting ZIP file containing individual diskette files:
Download WMFILTER.EXE 5.1 MB
.MKH Demonstration Files
These demo mark files illustrate how to optimize marking parameters, communicate with parts handling equipment, and much more.
ActiveX Sample Files
ActiveX control of laser marking is possible through Microsoft® Visual Basic® or Microsoft Visual C++® programming using WinMark Pro's ActiveMarkTM technology. These files contain sample VB and C++ code illustrating how WinMark Pro's ActiveX control methods are used.